Bryston Bi-200 Integrated Amplifier

Bryston integrated amplifiers give no ground to their separate counterparts. The new Bi-200 is literally constructed from the Bryston BP-19 Preamplifier and 3B amplifier into a single chassis offering the best of both products without occupying extra space and costly interconnects.

High performance and transparency is always our goal, and an integrated amplifier doesn’t have to compromise ability for convenience. Build your ultimate dream system with our separates or keep your stereo compact and discrete with our Bi-200 Integrated Amplifier.

BRYSTON Bi-200 ANALOG CIRCUITS

The Bi-200 analog integrated amplifier is a byproduct of years of R&D that resulted in the development of an optimized discrete buffer amplifier capable of delivering a staggeringly low THD+N distortion.

The analog signal path is a fully balanced design, using an array of very tightly matched components and a compact circuit design to achieve the lowest possible noise and superior common mode rejection. With the new balanced inputs and outputs we have been able to make significant improvements in performance in the Bi-200.

In the past, a fully balanced signal path was difficult to achieve because you would need a volume pot with 4 tapers. With the availability of these new volume control chips, this is no longer an issue. This new design allows for a lower noise floor than previous designs and is much better at common mode noise suppression. For the music enthusiast, this level of circuit sophistication means more lifelike performances, more detail and more dimensionality from the recordings you love.

OPTIONAL PHONO STAGE ADD-ON

Most Moving-Magnet phono stages expect to receive a signal between 3-6 mV at their input from the cartridge. The Bryston Moving Magnet stage is a 41dB @1kHz gain preamp with a very unique RIAA playback equalization for moving magnet cartridges. 

The RIAA Curve or equalization is a form of pre-emphasis on recording and de-emphasis on playback. A recording is made with the low frequencies reduced and the high frequencies boosted, and on playback, the opposite occurs. Bryston’s version of the RIAA curve is a one of a kind and has been proven to be one of the most accurate available. 

A step-up Moving-Coil transformer is designed to accept the lower voltage output from the MC cartridge and increase the voltage to a point which is acceptable to the input stage of the standard MM phono section. 

The internal proprietary Bryston Moving-Coil step-up transformer in the Bi-200 preamplifier is available in two versions...with a 20dB or a 26dB gain option. Your choice on which unit is most appropriate will be determined by the voltage output of your chosen cartridge. 

• From .1 to .2 mV we would recommend the 26dB version.
• At .3 mV we would say either version would work fine.
• From .4 to .5 mV or more we would recommend the 20dB version 

An important point to consider when choosing which Step-up to use is you do not want to over-power or under-power the MM phono stage. Under-powering results in not having enough GAIN in the system and over-powering can result in voltage overload and the resultant distortion.  

• Moving Magnet: is a 41dB @1kHz gain preamp with RIAA playback equalization for moving magnet cartridges.
• Moving-Coil Transformers: 20dB or 26dB inserted before the MM stage.

DEDICATED HEADPHONE AMPLIFIER

The Bi-200 features Bryston’s most powerful onboard headphone amplifier ever offered, providing the high-output and critical low-output impedance to drive even inefficient headphone models. 

The new Low Z headphone amp utilized in the Bi-200 delivers startling clarity and dynamic capability second only to Bryston’s legendary BHA-1 outboard headphone amplifier.

CONTROL

The Bi-200 includes elegant front panel controls plus a BR-4 hand-held remote. Six inputs selections are available on the Bi-200 remote, as well as Volume, Mute, and Power. 

If you are using a Bryston digital player like the BDP-3 or the BDP-31.4 the remote can also control Previous and Next etc. on your music files. The front panel LEDs and White display can be dimmed and the display is automatically disabled after a set time

PERSONALIZED FACEPLATES

Bryston is pleased to introduce the availability of personalized faceplate colours, available now for Bryston amplifiers, preamplifiers, CD players, digital players, phono stages and DAC’s. 

Our new colour choices, plus the option to create custom colours, enable Bryston electronics to blend seamlessly or contrast elegantly within any décor or equipment rack. 

Enjoy bespoke colour choices as an added touch to any entertainment space.

ADDITIONAL CUSTOM COLOURS AVAILABLE UPON REQUEST. Source buttons only available in Black or Silver. 

Features

• Full Balanced Discrete Circuit Path
• Analog Volume ... Digitally Controlled
• Connect up to 6 analog sources
• Optional low distortion MM/MC Phono module
• Dual-mono amplifier produces 200 watts into 8 ohms
• 300 watts per channel into 4 ohms.
• Channel balance control
• Fully convection cooled means no noisy fans
• Independent buffered headphone output
• Machined aluminum enclosure and dress panel
• 2-way RS232 for automation systems
• Compatible with BR-4 remote control
• Soft-Start microprocessor won't trip circuit breakers
• DC trigger out
• Legendary Bryston 20 Year Warranty on Analog
• Ethernet/USB/RS232 status control

Options

• Standard Silver or Black Faceplates Available in 17 or 19 Inch
• Pro 19 Inch Rackmount
• Colour Faceplates Available
• Phono Bi-200P & Bi-200MC
• Moving Coil Transformer Phono
• Module (20 or 26 dB)