JBL Synthesis SCL-2
Two-way Triple 8-inch (200mm) In-wall Loudspeaker with Included Back Box
SCL-2 is a custom in-wall loudspeaker designed primarily for use as an LCR or surround in larger systems. Part of the JBL Synthesis Custom Loudspeakers range, the SCL-2 offers the highest level of acoustic performance available from a flush-mount loudspeaker.
The SCL-2 is designed with a 2.5-way, triple 8-inch (200mm) driver configuration for low-frequency extension with high output capability and powerful dynamics. A D2415K dual voice coil, dual 1.5-inch (38mm) annular ring diaphragm Teonex® compression driver with advanced HDI geometry horn works in conjunction with three powerful cast-frame, 8-inch (200mm) Advanced Aluminum Matrix cone woofers with low distortion motor structures.
The loudspeaker’s 5.8-inch (147mm)-deep enclosure fits standard wall construction applications and features a SonoglassTM precision molded baffle assembly with integrated HDI waveguide/horn, and a zero-bezel, magnetically-attached grille.
The loudspeaker’s enclosure can be oriented with the horn closer to the top or bottom, or on its side for center channel or reduced height applications. SCL-2 systems can be mixed and matched with other SCL speakers or any JBL Synthesis loudspeakers.
Designed to provide ultimate performance and the highest levels of dynamics from any in-wall loudspeaker, the SCL-2 can discreetly integrate into any environment and décor. They can also be installed in a traditional application behind acoustic fabric or woven/ perforated video screens without installing the grilles. They feature a discrete matte black baffle, HDI waveguide, and transducers, with a paintable white grille. The SCL-2 is the perfect solution for in-wall LCR or surround channel applications as part of a JBL Synthesis home theater system and is ideal for use in medium, large, and extra-large rooms.
Highlights:
- 2 1⁄2-way, triple 8-inch/200mm driver configuration – ideal for wall mount
- 5.8-inch/147mm deep, rectangular footprint enclosure
- Can be mounted vertically or horizontally for maximum application flexibility and performance
- Computer-optimized HDI Constant Directivity Horn with very smooth and predictable off-axis behaviour over a wide coverage area
- D2415K, 1.5-inch/38mm annular ring Teonex® diaphragm compression driver with advanced HDI geometry horn
- Powerful cast-frame, Advanced Aluminum Matrix cone woofers with low-distortion neodymium motor structures
- Sonoglass® baffle with integrated HDI waveguide for maximum strength and high internal damping
- Solid MDF enclosure installs behind drywall and provides optimized acoustic performance and enhanced acoustic isolation from the wall
- Rubber isolation mounts attach cabinet to wall studs, ensuring a firm yet isolated mounting
- Bi-Wire and Bi-Amp capable network using gold-plated binding posts on rear enclosure, and an easy Molex® baffle to network connection
- Zero-bezel, magnetically-attached grille can be painted to match décor
Specifications:
Speaker type
2½-way in-wall loudspeaker
Low frequency transducer
Three 8” (200mm) cast-frame, Advanced Aluminum Matrix cone woofers
Mid/High frequency transducer
D2415K, 1.5” (38mm), dual annular ring Teonex® diaphragm compression driver mounted to Sonoglass® horn/baffle
Maximum recommended power
445 Watts RMS (CEA-426B specification, calculated onto the SCL-2 rated load impedance)
Frequency response (-6 dB on-axis)
57 Hz – 25 kHz
Coverage area (-6dB@20kHz)
80 x 70 Degrees (Hor x Vert)
Coverage area (-6dB@10kHz)
100 x 100 Degrees (Hor x Vert)
Sensitivity (2.83V@1m)
92dB
Nominal Impedance
6 Ohm
Crossover frequencies
225Hz; 1.3kHz
Enclosure type
Sealed in-wall mount with included back box
Inputs
Dual gold-plated binding posts
Finished grille dimensions (H x W)
40.25” x 12.84” (1022.4mm x 326mm)
Final cutout dimensions with backbox (H x W)
38.5” x 11.75” (977.9mm x 298.5mm)
Mounting depth with backbox
5.8” (147mm)
Weight
53.5 lb (24.3 kg)
Finishes
Matte Black with white paintable grille
Warranty
5 Years