JBL Synthesis SCL-3 In-Wall Speaker

SKU:
SCL/3
$4,800.00
Message bubble
Personal attention, expert advice.

Message Us Call (416) 967-1122

Description

 

JBL Synthesis SCL-3

Two-way 5.25-inch (130mm) In-Wall Loudspeaker with Included Back Box

 

 

The SCL-3 is a custom in-wall loudspeaker designed primarily for use as an LCR behind projection screens or as a height channel in ceiling applications. Part of the JBL Synthesis Custom Loudspeakers range, the SCL-3 offers the highest level of acoustic performance available from a flush-mount loudspeaker.

 

Utilizing JBL Professional’s patented D2 compression driver technology, the SCL-3 is capable of delivering very high dynamics with remarkably low-distortion for clarity and intelligibility at virtually any volume level. The 2409H compression driver used in the SCL-3 is mated to JBL’s patented High- Definition Imaging (HDITM) waveguide for remarkably uniform and predictable coverage over a wide area – eliminating the need for the speakers to be angled or aimed when installed. Low frequencies are delivered by two powerful cast-frame, Advanced Aluminum Matrix cone woofers operating in conjunction with the included MDF enclosure for consistent performance and minimal sonic intrusion into adjacent spaces.

 

Premium network components, Bi-Wire and Bi-Amp capability, flexible mounting applications, and a Zero- Bezel, magnetically attached grille leave no details unattended.

 

The SCL-3 is the perfect solution for in-wall LCR, surround, or overhead height channel applications as part of a high-performance JBL Synthesis home theatre system in medium to large rooms.

 


 

Highlights:

 

  • Two-way dual 5-1⁄4-inch / 130mm driver configuration – ideal for wall or ceiling mount
  • 5.8" (147mm) deep square footprint enclosure. This depth fits well in a 6" or deeper mounting space, wall or ceiling
  • Can be mounted in any orientation for maximum application flexibility and performance
  • Computer Optimized HDI Constant Directivity Horn with very smooth and predictable off- axis behaviour over a wide coverage area
  • 2409H, 1-inch / 25mm annular ring Teonex® diaphragm compression driver with advanced HDI geometry horn
  • Powerful cast-frame, Advanced Aluminum Matrix cone woofers with low-distortion neodymium motor structures
  • Solid, wood enclosure installs behind drywall and provides optimized acoustic performance
  • Unique Center-Mount feature clamps center of baffle to rear of MDF enclosure to greatly minimize unwanted baffle resonances
  • Network is Bi-Wire and Bi-Amp capable using gold plated 5-way binding posts used on rear enclosure and baffle network assembly
  • Zero-bezel, magnetically-attached grille can be painted to match decor



Specifications: 

 

Speaker Type

Two-way In-Wall Loudspeaker

 

Low Frequency Transducer

Dual 5-¼” (130mm) cast-frame, advanced aluminum matrix cone woofers

 

Mid/High Frequency Transducer

D2-derived 1" (25mm) 2409H annular ring, Teonex® diaphragm compression driver

 

Maximum Recommended Amplifier Power

200 watts RMS

 

Frequency Response (-6dB on-axis)

65 Hz – 33KHz

 

Coverage area (-6dB @ 20 KHz)

90 x 60 deg, (-6dB @ 10 KHz)

 

Sensitivity (2.83V@1m)

91dB

 

Nominal Impedance

6 Ohm

 

Crossover Frequencies

1.3 KHz

 

Enclosure type

Sealed In-Wall Mount with included back box

 

Inputs

Dual Gold-plated Five-way Binding Posts

 

Dimensions (H x W x D)

16.46" x 16.46" x 6.01" (418mm x 418mm x 153mm)

 

Weight

24.3 lb (11.02 kg)

 

Finishes

Matte Black

 

Warranty

5 Years

Specs

Dimensions

About JBL Synthesis

You May Also Like

Browse these similar products.

Card Icon

Personal Attention, Expert Advice

We’re here to answer your questions and help you make the right choice.

Card Icon

Service Department

Our advisers and technicians are standing by to assist after your purchase.

Card Icon

Since 1946

Family owned and operated. Buy with confidence from a store you can trust.