JBL Synthesis
JBL Synthesis SCL-3 In-Wall Speaker
$4,800.00
Description
JBL Synthesis SCL-7
Two-Way Dual 5.25-inch (130mm) In-Wall Loudspeaker
The SCL-7 is the smallest in-wall model in the expanded in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for deployment in high-performance immersive audio systems in small to medium size rooms as a width or surround channel, or as an LCR in smaller systems.
SCL-7 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration and asymmetric design yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position.
Premium components are used throughout the crossover network including a boundary gain adjustment switch while high- quality gold-plated push type speaker terminals ensure a secure connection. Installation is simple and quick with the new Cat Claw mounting mechanism that allows the speaker to be securely clicked into place freeing up two hands for tightening it down flush and level to the wall. A zero bezel magnetically attached grille is included and can be painted to match any décor.
The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.
Highlights:
- 2-way in-wall loudspeaker system designed for off-axis listening as LCR and surround channels
- 1-inch 2410H-2 compression driver tweeter mated to a JBL patented High-Definition Imaging (HDITM) horn precision molded baffle assembly
- Two 5.25-inch (130mm) Advanced Aluminum Matrix cone cast frame woofers
- Can be mounted vertically or horizontally
- Patented Cat Claw installation mechanism
- Gold plated, spring-loaded binding posts
- Includes paintable zero-bezel, magnetically attached grilles
- Compatible with WB52 pre-construction bracket
Specifications:
Type
2-Way In-wall loudspeaker
Low Frequency Driver
Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)
High Frequency Driver
1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
Recommended Amplifier Power
25 – 150W RMS
Impedance
4 Ohm
Loudspeaker Sensitivity
88 dB/2.83V/1m (2pi anechoic)
Frequency Response
55Hz - 30kHz (-6 dB on-axis), 2pi anechoic
Crossover Frequency
2.0 kHz
High Frequency Coverage Angle (-6 dB)
60° Vertical, 90° Horizontal (Left)
Enclosure Type
Open back
Controls
Boundary Proximity Control
Grille Dimensions
7.32” (186 mm) x 19.15” (486 mm)
Product Dimensions (with grille)
7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm)
Cut-out Dimensions
6.18” (157 mm) x 18.03” (458 mm)
Rough-in Bracket
WB52
Mounting Depth
3.64” (93 mm)
Input Type
Gold-plated spring-loaded binding posts
Product Weight
12.6 lbs (5.72 kg)
Shipping Weight
14.6 lbs (6.62 kg)
Shipping Units of Measure
Each
Warranty
5 Years
Specs
Dimensions
About JBL Synthesis
You May Also Like
Browse these similar products.
JBL Synthesis
JBL Synthesis SCL-4 In-Wall Speaker
$4,800.00
JBL Synthesis
JBL Synthesis SCL-2 In-Wall Speaker
$9,500.00
JBL Synthesis
JBL Synthesis SCL-6 In-Wall Speaker
$2,300.00
JBL Synthesis
JBL Synthesis SCL-5 In-Ceiling Speaker
$3,100.00
$23,000.00
Personal Attention, Expert Advice
We’re here to answer your questions and help you make the right choice.
Service Department
Our advisers and technicians are standing by to assist after your purchase.
