JBL Synthesis SSW-3 In-Wall Passive Subwoofer

$3,700.00
Message bubble
Personal attention, expert advice.

Message Us Call (416) 967-1122

Description

 

JBL Synthesis SSW-3

Dual 10" (250mm) Passive In-Wall Subwoofer

 

 

The SSW-3 is an in-wall subwoofer system designed to deliver powerful and accurate low frequency response while remaining hidden from view. It features dual 10-inch (250mm) cast-frame woofers mounted in a heavily-braced Sonoglass molded baffle and an MDF Enclosure that installs into standard 2x6 wood frame wall construction. The SSW-3 delivers performance in medium to large rooms. 

 

The 10-inch woofers used in the SSW-3 are designed to provide extremely high-excursion from the relatively shallow cabinet-depth of the enclosure. A newly designed fully vented cast aluminum frame provides more mass for greater strength and higher heat conduction to assist in driver cooling. Enhanced motor venting delivers increased output, lower distortion, improved airflow, reduced turbulence and greater cooling.

 

Extremely long 66mm voice coils and polymer-coated aluminum cones combine with over-sized SBR rubber surrounds for greater excursion, enhanced moving-mass control, and improved longevity under high-stress usage. With 600W RMS power handling, the sub is designed to handle the full power output of a single channel from a JBL Synthesis SDA-4600 power amplifier.

 

The SSW-3 enclosure is designed to be installed behind drywall and includes duplicate gold-plated, spring-loaded binding post speaker terminals on each end so it can be mounted at floor or ceiling level for ease of installation and wiring. Rubber isolation screw mounts provide secure attachment to traditional 16” on-center framing while greatly reducing vibration and acoustic transmission.

 


 

Highlights:

 

    • Dual 10" (250mm) composite cone woofers
    • Designed for use with JBL Synthesis SDA amplifiers
    • Self-contained, concealed module with integrated back box
    • SSW-3 includes back box and baffle shipped together in over-packed box
    • Zero-bezel, magnetically attached grille
    • Rigid MDF enclosure
    • Designed to fit standard 2 x 6 stud frame construction

 

 


Specifications: 

 

Frequency Response:

20Hz – 150Hz (-6dB)

 

Maximum Recommended Amplifier Power:

600 Watts RMS

 

Impedance:

4 Ohms nominal

 

Sensitivity:

88dB (2.83V/1m), both woofers driven

 

Woofer:

Dual 10"/250mm composite cone woofers

 

Dimensions of SSW-3BB enclosure (H x W x D):

64" x 14" x 5.1" (1626mm x 356mm x 130mm)

 

Mounting Cutout Size (W x H):

15.5" x 66" (393.7mm x 1676.4mm)

 

Grille Size (W x H x D):

16.890" x 28.425" x 0.375" (429mm x 722mm x 9.53mm)

 

Weight per Speaker:

81 lbs (36.75kg)

Specs

Dimensions

About JBL Synthesis

You May Also Like

Browse these similar products.

Card Icon

Personal Attention, Expert Advice

We’re here to answer your questions and help you make the right choice.

Card Icon

Service Department

Our advisers and technicians are standing by to assist after your purchase.

Card Icon

Since 1946

Family owned and operated. Buy with confidence from a store you can trust.