Pro-Ject T1 EVO Phono Turntable with Phono Preamp and OM10 Cartridge

T1 EVO Turntable with Phono Preamp

The T1 EVO Series adds the classic Ortofon OM 10 phono cartridge, a larger ‘Debut-sized’ sub-platter as well as electronic speed change for all models. T1 EVO Phono has a built-in MM phono preamp for connection to any line-level input. The phono preamp can be disengaged too if you’d rather use your own.

• Built-in moving magnet phono preamp (switchable!)

• Electronic speed change

• Pre-adjusted Ortofon OM10 cartridge

• Larger anti-resonant sub-platter (Debut-sized)

• Heavy 8mm-thick low-resonance glass platter

• CNC-machined chassis (no resonant hollow spaces!)

• 8.6″ one-piece aluminum tonearm

• Low-friction, vibration-free tonearm bearing

• Low-capacitance Connect it Phono E RCA cables

• Vibration-absorbing isolation feet

• Elegant dust cover with adjustable hinges

• Available in gloss black and satin walnut laminates

• Handmade in Europe

The T1 EVO aims to deliver true high-fidelity sonics for vinyl enthusiasts on a limited budget. Boasting premium materials, stylish aesthetics and rich, lively sound quality, our extensive development process has ensured no compromise to sonics in the design & build of T1 EVO. The stylish CNC-machined plinth (available in gloss black, satin white or satin walnut laminates) uses no plastic and is carefully manufactured to eliminate resonant hollow spaces that would otherwise detract from sound quality. ‘Sound-first’ principles are implemented throughout. The glass platter is heavy and non-resonant, again avoiding the flaws of plastic and cheap steel alternatives. Additionally, the purpose-selected turntable feet are highly effective in isolating the T1 EVO from ambient vibrations in the vicinity of your hi-fi system.

Audiophile implements

T1 EVO’s motor drives a belt attached to a larger sub-platter (Debut-sized!) which rotates in a bearing assembly machined to tolerances within 0.001mm. It’s comprised of a stainless steel spindle in brass bushing. All told, the T1 EVO drive system ensures stable & accurate platter speeds with non-resonant behavior, allowing the tonearm & cartridge to perform their very best. The tonearm is an 8.6″ one-piece aluminum design, meaning the headshell and armtube are integrated for the sake of rigidity & resonance control. High-quality bearings allow for silent & frictionless motion of the tonearm. Supplied with an Ortofon OM 10 moving magnet cartridge featuring an elliptical diamond stylus tip, this is a true hi-fi playback system with no corners cut! The cartridge is aligned, tracking force is set at the factory and anti-skating is built-in, sparing you the trickiest parts of turntable setup so that you can be spinning vinyl in mere minutes.

No corners cut. More sound. 

The T1 EVO tonearm is a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 EVO is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Ortofon OM10

Supplied with an Ortofon OM10 Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect It E

The T1 EVO comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU

Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

SPECS

• Speed: 33 & 45rpm (electronic speed change)
• Principle: Belt driven sub-platter
• Speed variance: 0.7% (33rpm), 0.6% (45rpm)
• Wow & Flutter: 0.25% (33rpm), 0.23% (45rpm)
• Platter: Heavy 8mm-thick blasted-glass platter
• Main bearing: Stainless steel axle in brass bushing
• Signal to noise: 65dB
• Tonearm: 8.6” one-piece aluminum
• Effective arm length: 218.5mm
• Overhang: 22.0mm
• Effective tonearm mass: 8.0g
• Counterweight for mass: 5-10g (pre-adjusted)
• Tracking force range: 0-5g (set at 1.75g)
• Included accessories: dust cover, felt mat, power supply, high-quality phono/line RCA cable
• Power supply: 110-240V 50-60Hz 15V DC (800mA)
• Power consumption: 4.5W max
• Dimensions (WxHxD): 415 x 100 x 335mm
• Dimensions (standard): 16.34 x 3.94 x 13.19″
• Mass (weight): 3.8kg (8.38 lbs) net