Pro-Ject T1 EVO Turntable with OM10 Cartridge

T1 EVO Turntable

The T1 EVO Series adds the classic Ortofon OM 10 phono cartridge, a larger ‘Debut-sized’ sub-platter as well as electronic speed change for all models. The T1 EVO base model is a conventional manual turntable. It requires either an outboard phono preamp or a phono input on the receiving end.

• Electronic speed change
  

• Pre-adjusted Ortofon OM10 cartridge

• Larger anti-resonant sub-platter (Debut-sized)

• Heavy 8mm-thick low-resonance glass platter

• CNC-machined chassis (no resonant hollow spaces!)

• 8.6″ one-piece aluminum tonearm

• Low-friction, vibration-free tonearm bearing

• Low-capacitance Connect it Phono E RCA cables

• Vibration-absorbing isolation feet

• Elegant dust cover with adjustable hinges

• Available in gloss black and satin walnut laminates

• Handmade in Europe

The T1 EVO aims to deliver true high-fidelity sonics for vinyl enthusiasts on a limited budget. Boasting premium materials, stylish aesthetics and rich, lively sound quality, our extensive development process has ensured no compromise to sonics in the design & build of T1 EVO. The stylish CNC-machined plinth (available in gloss black or satin walnut laminates) uses no plastic and is carefully manufactured to eliminate resonant hollow spaces that would otherwise detract from sound quality. ‘Sound-first’ principles are implemented throughout. The glass platter is heavy and non-resonant, again avoiding the flaws of plastic and cheap steel alternatives. Additionally, the purpose-selected turntable feet are highly effective in isolating the T1 EVO from ambient vibrations in the vicinity of your hi-fi system.

Audiophile implements

T1 EVO’s motor drives a belt attached to a larger sub-platter (Debut-sized!) which rotates in a bearing assembly machined to tolerances within 0.001mm. It’s comprised of a stainless steel spindle in brass bushing. All told, the T1 EVO drive system ensures stable & accurate platter speeds with non-resonant behavior, allowing the tonearm & cartridge to perform their very best. The tonearm is an 8.6″ one-piece aluminum design, meaning the headshell and armtube are integrated for the sake of rigidity & resonance control. High-quality bearings allow for silent & frictionless motion of the tonearm. Supplied with an Ortofon OM 10 moving magnet cartridge featuring an elliptical diamond stylus tip, this is a true hi-fi playback system with no corners cut! The cartridge is aligned, tracking force is set at the factory and anti-skating is built-in, sparing you the trickiest parts of turntable setup so that you can be spinning vinyl in mere minutes.

No corners cut. More sound. 

The T1 EVO tonearm is a complete one-piece design, entirely made out of aluminium! Together with the low friction bearings, this guarantees absolute accuracy in use. The integrated headshell won‘t cause any additional vibrations either, and is a big improvement over other detachable, screwed-on or glued-on headshells! The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 EVO is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

Ortofon OM10

Supplied with an Ortofon OM10 Moving Magnet cartridge, featuring an elliptical diamond stylus tip; this is a true hi-fi playback system with no corners cut.

Connect It E

The T1 EVO comes with our super shielded, semi-symmetrical, low-capacitance phono cables, purpose-designed by Pro-Ject specifically for turntables – not off-the shelf RCA cables.

Made in EU

Made in Europe by a turntable factory with decades of experience, it is a true hi-fi turntable that looks and sounds sublime.

SPECS

• Speed: 33 & 45rpm (electronic speed change)
• Principle: Belt driven sub-platter
• Speed variance: 0.7% (33rpm), 0.6% (45rpm)
• Wow & Flutter: 0.25% (33rpm), 0.23% (45rpm)
• Platter: Heavy 8mm-thick blasted-glass platter
• Main bearing: Stainless steel axle in brass bushing
• Signal to noise: 65dB
• Tonearm: 8.6” one-piece aluminum
• Effective arm length: 218.5mm
• Overhang: 22.0mm
• Effective tonearm mass: 8.0g
• Counterweight for mass: 5-10g (pre-adjusted)
• Tracking force range: 0-5g (set at 1.75g)
• Included accessories: dust cover, felt mat, power supply, high-quality phono/line RCA cable
• Power supply: 110-240V 50-60Hz 15V DC (800mA)
• Power consumption: 4.5W max
• Dimensions (WxHxD): 415 x 100 x 335mm
• Dimensions (standard): 16.34 x 3.94 x 13.19″
• Mass (weight): 3.8kg (8.38 lbs) net